C Chesso New Member May 31, 2008 #1 I've put a 1UZ into an Aussie 4Runner, it started and seems to run fine but I cant for the life of me work out where the brake booster connection is. Can anyone help me out? perhaps a photo. Chesso
I've put a 1UZ into an Aussie 4Runner, it started and seems to run fine but I cant for the life of me work out where the brake booster connection is. Can anyone help me out? perhaps a photo. Chesso
G gloverman Well-Known Member Jun 1, 2008 #2 Back of the plenium. Some have a 12mm blanking bolt - which I suspect is the one you have. Other ones replace the blanker with a bango fitting and bolt. Cheers
Back of the plenium. Some have a 12mm blanking bolt - which I suspect is the one you have. Other ones replace the blanker with a bango fitting and bolt. Cheers
C Chesso New Member Jun 1, 2008 #3 Thanks mate, I found the blanking plug M12x1.25 by the look of it. Attachments SC400 Convertible.jpg 5.5 KB · Views: 200
C Chesso New Member Jun 1, 2008 #4 This banjo fitting may take a little tracking down, is there any reason I cant T off of the rocker cover PCV vent line circled in the photo?
This banjo fitting may take a little tracking down, is there any reason I cant T off of the rocker cover PCV vent line circled in the photo?
