300bhp/ton
New Member
Hi,
I know this has been covered. And I've done some searching first. But quite keen for some help on this.
I've just purchased a 1UZ-FE to fit as an engine swap into another car.
I need a gearbox/transmission to go with it.
I'm not planning on running big power, mostly stock with just a good exhaust (no cats) and a custom induction setup. The car will weigh around 1400-1500kg.
The only other things to consider:
-I'm in the UK, so stuff I can find and source here with ease would be a real preference.
-I need to be able to get hold of all of the bits to make this work. Bellhousing and anything else I'll need.
Thanks.
I know this has been covered. And I've done some searching first. But quite keen for some help on this.
I've just purchased a 1UZ-FE to fit as an engine swap into another car.
I need a gearbox/transmission to go with it.
I'm not planning on running big power, mostly stock with just a good exhaust (no cats) and a custom induction setup. The car will weigh around 1400-1500kg.
The only other things to consider:
-I'm in the UK, so stuff I can find and source here with ease would be a real preference.
-I need to be able to get hold of all of the bits to make this work. Bellhousing and anything else I'll need.
Thanks.