tbucketpower
New Member
Hi all, your site has been great to look at for info, however here is my problem.
I have a 1992 1UZFE into a T bucket. Had the engine fired up prior to strip down for body work. body back on rewired again but now will not run.
The vehicle turns over fires but then stalls. As it has headers on it i can feel which pipes/cyclinders are getting hot (Ie getting spark and fuel)
They are 1 4 6 and 7 all the others are cold to the touch. this happens to be the left ignitor / dizzy. I have an after market fuel pump and have good fuel pressure. I have swaped ignitors around, no go, tried another ecu as the first one we got with the loom was burnt out from the wreck. Any ideas please help as it is so close to running i am going mad.
Thanks
I have a 1992 1UZFE into a T bucket. Had the engine fired up prior to strip down for body work. body back on rewired again but now will not run.
The vehicle turns over fires but then stalls. As it has headers on it i can feel which pipes/cyclinders are getting hot (Ie getting spark and fuel)
They are 1 4 6 and 7 all the others are cold to the touch. this happens to be the left ignitor / dizzy. I have an after market fuel pump and have good fuel pressure. I have swaped ignitors around, no go, tried another ecu as the first one we got with the loom was burnt out from the wreck. Any ideas please help as it is so close to running i am going mad.
Thanks