Search results

how about 35108-30111 or 35108-35030 for the slip yoke seal the part number you quoted was for transmission with three prong fitting

Return line is connected to the fuel pressure regulator

I have a 2001 model JDM motor not a 1UZ though and it does not have OBD2 compliance even though it has a socket for OBD2. I would expect OBD2 to be on exported models though

Also diff from GS300 Lexus/Aristo

Just out of interest where would you you expect the backfire to come from?

I made a bush with a screw running through it axially and can adjust the idle down to whatever you like. Placed in the big tube going to the ISCV. I lost the high idle when cold and have to keep it going for the first 30 seconds or so after that it settles down to the slow idle it is set at. I...

You can take your driving test in a V8 and if you get your licence you cannot drive it home with your new P plate licence. P platers are allowed to drive cars with up to 200KW which is more power than a stock 1UZ and more power than some turbo cars. I was quite taken with a sign seen in Sydney...

The timing belt sometimes jumps a tooth and upsets matters. Have you checked the cam timing?

If you have no reverse and you have forward gears this means your clutches which give you reverse are not working. The gears themselves are used for forward as well as reverse. The gears are also different ratios

try this one although I expect this address to be offline in about a month http://members.optusnet.com.au/madmont/project/project.htm

Sump has to come off

Would you have the ISCV still?

I have a R151 out of a 2005 hilux with a 160 mm input and I have a Prado box from about 1998 with a 190mm input . The length of your bellhousing should give a good indication of the length of your input

I would be doubtful about that

R151 and R154 have same bolt pattern different length input shafts

I had a recent experience with a 3RZ which is the 2.7 with waste spark. I had been driving it in and out of my shed each day and the motor was not warming up and was running rich as it was cold. It was starting to miss on startup. One day when I went to start it ,it would not fire even though I...

Number 2 looks like the solenoid valve to turn on the hydraulic fan

I have an ecu here in Brisbane

With your part number on your ecu you should be able to go close for the year of manufacture and the vehicle it came from