autronic
Member
- Messages
- 329
- Location
- Bergen, Norway
I have SolidWorks drawings of the 1UZFE intake flange, but I'm having problems getting somebody to
machine parts here in Norway. Does anybody out there have access to a CNC mill or know anybody that can
get something like this made ?
All the measurements are checked, I have had 5 mm thick "prototype" aluminium plates water cut to check
the bolt patteren holding it to the head, positioning of the injectors, port positioning and clearances towards
the front and rear water bridges.
One prototype must be made first and tested on a head to make certain it is fine, after that I need 3 pairs
( 6 pieces ) and if other members on the forum is interested more can ( hopefully ) be made.
The 2 pictures is of "universal" flange to build a custom intake from, it will be made from an aluminium plate
( 472 mm long and 65 mm wide ) and minimum 30 mm thick.
The far right and left holes is 2 holes predrilled in the plate to fasten it to the mill.
Finally, I have drawings for both japanese style injectors and european style, japanese style shown.
machine parts here in Norway. Does anybody out there have access to a CNC mill or know anybody that can
get something like this made ?
All the measurements are checked, I have had 5 mm thick "prototype" aluminium plates water cut to check
the bolt patteren holding it to the head, positioning of the injectors, port positioning and clearances towards
the front and rear water bridges.
One prototype must be made first and tested on a head to make certain it is fine, after that I need 3 pairs
( 6 pieces ) and if other members on the forum is interested more can ( hopefully ) be made.
The 2 pictures is of "universal" flange to build a custom intake from, it will be made from an aluminium plate
( 472 mm long and 65 mm wide ) and minimum 30 mm thick.
The far right and left holes is 2 holes predrilled in the plate to fasten it to the mill.
Finally, I have drawings for both japanese style injectors and european style, japanese style shown.