Im selling off the swap1uz based kit i bought to raise some cash for a nice performance based kit 
It was based on the 1uz plate, but 3 holes were wrong so a local machine shop made up a new plate with the holes relocated. the swap1uz one was binned.
Its got most of the bits you need to convert your 1uzfe to six speed manual. You need a new clutch slave which are 30 dollars on ebay, and a NA 300zx clutch plate
1:Adapter plate
2
ilot bearing
3: clutch release bearing
4:z33 gearbox
5: 3sgte flywheel and clutch cover
6:Z33 short shifter
7:Z33 front half of propshaft






Im after 600 GBP plus postage, or you can collect

It was based on the 1uz plate, but 3 holes were wrong so a local machine shop made up a new plate with the holes relocated. the swap1uz one was binned.
Its got most of the bits you need to convert your 1uzfe to six speed manual. You need a new clutch slave which are 30 dollars on ebay, and a NA 300zx clutch plate
1:Adapter plate
2

3: clutch release bearing
4:z33 gearbox
5: 3sgte flywheel and clutch cover
6:Z33 short shifter
7:Z33 front half of propshaft






Im after 600 GBP plus postage, or you can collect