Raising the idle on a 1uz-fe motor..

[jibbby]

Need a little help guys...Ever since I installed my S&S headers on my SC400 the idle seems to be ride slightly lower then normal...I even stall out once in a while when I come to a stop...I see the Throttle position sensor, and am wondering if there is there a way to effectively raise the idle maybe 200rpm's at idle and make it stick? I can start experimenting but thought you guys might lend me some help on this...I am tired of running the A/C just to keep the idle at normal...

Any advise would be appreciated...

 

[Lextreme II]

http://lextreme.com/forums/showpost.php?p=58122&postcount=2 You do the opposite of that post by Rod and it will increase idle.

 

[jibbby]

Thanks Dave, so there is an adjustment screw...Excellent.....

 

[Peewee]

You have to make 100% sure that the TPS goes back to IDL when there is no pressure on the throttle.

Otherwise the idle will be all over the place.

 

[jibbby]

Yeah Peewee I am finding that out.....My idle does bounce just a little or pulsate just a hair.....