JustenGT8 New Member Aug 25, 2013 #1 I have 2 sets of 8 injectors FS, acquired in my various UZ builds. 7MGE 315cc/min high impedance- good for 400ish hp $200 RX7 550cc/min high impedance - good for 700ish hp $400 Plus post
I have 2 sets of 8 injectors FS, acquired in my various UZ builds. 7MGE 315cc/min high impedance- good for 400ish hp $200 RX7 550cc/min high impedance - good for 700ish hp $400 Plus post
T travolous New Member Aug 26, 2013 #2 Justin, just to clarify, do either of these injector types use the 1uz fuel injector harness clips?
JustenGT8 New Member Aug 26, 2013 #3 The 7m ones kinda do. Same clip but there's one little tab you need to trim down...takes 5 seconds with a stanley knife and doesn't affect a thing. I ran the 7MGT ones like this for years no dramas. the RX injectors take a Bosch plug
The 7m ones kinda do. Same clip but there's one little tab you need to trim down...takes 5 seconds with a stanley knife and doesn't affect a thing. I ran the 7MGT ones like this for years no dramas. the RX injectors take a Bosch plug
JustenGT8 New Member Sep 5, 2013 #4 Make that 3 sets. Also FS my set of Evo 620's, low impedance. I ran these out to 411 rwkw on E85. Good for 500rwkw on 98
Make that 3 sets. Also FS my set of Evo 620's, low impedance. I ran these out to 411 rwkw on E85. Good for 500rwkw on 98
B BoostedV8 New Member Oct 10, 2013 #6 What's the max safe rwhp rating for these 7MGE 315cc/min high impedance- good for 400ish hp $200
O omalley Member Oct 11, 2013 #8 im too late! for those yellow ones 315cc, by any chance have you got 2 spare? (7mge)
K KingSC New Member Nov 20, 2013 #13 I might need a set of high impedance injectors in a little bit. Keep us updated if anything changes. Last edited: Nov 20, 2013
