I'm the 1st to post in the uk section!

[MaccyD]

haha good effort bud. Im the same, in and running last weekend of the month hopefully. Booked the monday of work just in case

 

[poweredby1uz]

haha good effort bud. Im the same, in and running last weekend of the month hopefully. Booked the monday of work just in case

Hows your wiring going?

 

[poweredby1uz]

I need a stock 91/92 ecu and cheap as I only want to get it wired up to test the motor

 

[ruishy1]

i may have one from a soarer mate, you have any ecu numbers i can check it against ?

 

[poweredby1uz]

i may have one from a soarer mate, you have any ecu numbers i can check it against ?

All I know is the engine is from a LS400 and something about a 3 plug like the supra?

It seems like if its after 92 it should work as there are no different.

 

[ruishy1]

il check if its a 3 plug, if it is call it 20 quid delivered mate

 

[poweredby1uz]

Cheers ruishy I'll take a photo of the loom at when Its in front of me

 

[poweredby1uz]

Maccyd you got that lump in the car yet?

 

[MaccyD]

http://img.photobucket.com/albums/v428/George106xsi/2012-04-30174158.jpg

and i can even do this!!

http://img.photobucket.com/albums/v428/George106xsi/2012-04-30174308.jpg

 

[MaccyD]

Oh, i also had some blanking plates for the EGR made at work:

http://img.photobucket.com/albums/v428/George106xsi/2012-04-25184142.jpg

I ended up having an extra set made as they were 4mm and i asked for 3mm so if anyone wants them give me a shout.

Once ive got the engine in and running im going to look at blanking the actual valve itself and will make a plate for that too, so again if anyones interested im sure i could get some spares made.

 

[poweredby1uz]

I just dropped my engine in its hitting on the brake pipes and clutch at the mo but i think i'm going to rip all that out and fit a pedal box with fake floor

Maccy: interested to see what your mounts were like and how close the engine is to the firewall if you wouldn't mind showing me?

 

[Smoke]

1uzdrift : what exhaust system are you using??
sounds v.Nice

 

[ernie]

Hi guys,

Just spotted this. Ex-pat across the water.
Dying with flu at the mo so have a chance to properly trawl the site.
Remember just because it;s a Japanese engine don't mean the body has to be.

 

[stewart]

hi all in the UK
i have a land rover disco-2 with a 1UZFE 4.0 i built all the parts myself made my own rear sump good protect

 

[Gazzer]

Hi Guys
New to the forum. Just brought my first Lexus LS400 and i'm pretty amazed by tbh.

 

[prackers]

Hi guys, not really new to the forum but just found this!

1UZ powered TR7 here ......one day! Just last week met a guy putting the same in a race SD1 only 4 miles from me so at least 2 of us near Scotch Corner.

 

[dooleysl]

Been on here a while and just found this section, getting near the end of my build. A few running issues to sort (after a trip to the fabricators)...if anyone can recommend someone reliable let me know


https://www.flickr.com/photos/1976so22/13991285230/
https://www.flickr.com/photos/1976so22/13991289278/

 

[Handgrenade]

Been on here a while and just found this section, getting near the end of my build. A few running issues to sort (after a trip to the fabricators)...if anyone can recommend someone reliable let me know


https://www.flickr.com/photos/1976so22/13991285230/
https://www.flickr.com/photos/1976so22/13991289278/

I had a look through your photos. You've got an amazing build and some fantastic pics in there. Impressive.