Philly#1 Lex
New Member
Been reading around other car forums and was wondering what you guys opinions on Holset turbo's? And does anyone know where to find the maps for there turbo's? Thanks
Holset Turbo's
- Thread starter Philly#1 Lex
- Start date
The 1UZFE EGR Delete Kit is available for sale here.
Holset turbo
I am considering twin Holsets, the HY35.
The HX35 has a really strong following among Honda 1.8, nissan SR20, Ford 2.3 enthusiasts. Lots of people putting up really good numbers with these turbos. It is starting to have a reputation as the poor man's GT30. The turbines are suppossed to have a better blade design than T-3 turbines.
Here are some links
http://www.turbomustangs.com//forums/showthread.php?threadid=32406&perpage=20&pagenumber=1
http://www.dodgeram.org/tech/dsl/FAQ/turbo_faq.htm
I know I found some maps somewhere.....
I am considering twin Holsets, the HY35.
The HX35 has a really strong following among Honda 1.8, nissan SR20, Ford 2.3 enthusiasts. Lots of people putting up really good numbers with these turbos. It is starting to have a reputation as the poor man's GT30. The turbines are suppossed to have a better blade design than T-3 turbines.
Here are some links
http://www.turbomustangs.com//forums/showthread.php?threadid=32406&perpage=20&pagenumber=1
http://www.dodgeram.org/tech/dsl/FAQ/turbo_faq.htm
I know I found some maps somewhere.....
maps
"Here are some HX/HY-35 maps. Boost pressure at 20 psi (pressure ratio calculated from that), with cfm plotted from 500 to 8000 rpm. Pre-2003 HX-35 in Green. 2003 - 2004.5 HY-35 in Black. 2004.5 - Present HY-35 in Red. This is for 2.0L of displacment. (Excuse the updated graph, as I have some small changes yet to make to the fonts and scales, but the maps are correct.)"
http://dsmtuner.com/forums/showthread.php?t=145691&page=1&pp=25
"Here are some HX/HY-35 maps. Boost pressure at 20 psi (pressure ratio calculated from that), with cfm plotted from 500 to 8000 rpm. Pre-2003 HX-35 in Green. 2003 - 2004.5 HY-35 in Black. 2004.5 - Present HY-35 in Red. This is for 2.0L of displacment. (Excuse the updated graph, as I have some small changes yet to make to the fonts and scales, but the maps are correct.)"
http://dsmtuner.com/forums/showthread.php?t=145691&page=1&pp=25
