Factory Supercharged 1uz????

[fugly]

Hey guys & gals (is there any on here?), i have heard what i am assuming is just a rumor & am not sure if it has been asked before, so here goes.

Was there ever any factory supercharged 1UZ's produced??? even if in very limited numbers.
Anyone.....

 

[Jake Breyck]

i have never heard of such a thing and the largets toyota super charger ive ever heard of is the SC14 and it wouldnt keep up with a 1uz, not including the TRD superchargers

 

[Lextreme II]

Hey Jake,

Sup bro... how about two SC14? I know a local Japanese Import sell them for like $95 each with about 50k miles on them. I wonder if those two charger mount in place of the alternator and ac compressor would be very cool.

 

[gloverman]

Hello - There is a guy here in NZ that sells SC14's and one of his customers mounted two onto a 1UZ. Went really well. I would like to see photos. It may have been in a jetboat. Cheers

 

[Jake Breyck]

95$ each is a good price, but other then a small boost in power i dont think two would do a whole lot (400hp tops) i think some of the supercharger and turbo projects going on on this board are already a better way to go.

 

[sefo]

anyone botherd with this set up just remembered it has no price but imagine it woul be abit expensive for the gain tho. http://www.luxurymods.com/ProductDetail.php?CatID=14&ProductID=757&fid=1011

 

[Sprinterboy]

this is a V6 holden motor, but it's an idea on how you could set one up

 

[jibbby]

Sweet I haven't seen that setup yet on an 1uz-fe.... I like what I see if that setup can produce 400whp atleast??????

 

[striker]

Ah I asked about that a few weeks back, regarding a 1uz and 2 eatons, and there was noone who had seen a twin roots charged engine,

Glad there's evidence of it working well. i just wonder if he's got belt slipage problems. and one stupid question regarding that set-up (holden V6 twin charge)
he's using after blower throttlevalves and 2 blow off valves to dump boost on colsed throttle,
does that mean the chargers can run without bleed (recirculation) valves?
and if so will it soak more power on cruise and idle? because that's when normaly the bleedvalve opens up and equalizes presure before and after the supercharger?

just one decision now, 1 M90 vs 2 M45's or 2 M62's
looks decide on twin set up money on m45's and 400hp is enough.... so???

regards Thomas

 

[Lextreme II]

What I have heard the Toyota SC14 is like 1.4L and the M90 is 1.5L. Do you guys know who one that twin charged Holden? I would like to get a pulley from him.

 

[Sprinterboy]

Type---Year------Model------Length-----Width------Height----Weight----Displacement
SC14--85-89+---1G-GZE----311mm----148mm----254mm---11.9kg----1420cc
SC12--86-89+---4A-GZE----249mm----148mm----254mm---10.8kg----1200cc


SC12 1.2 Litre
SC14 1.4 Litre

specs if anybody needs them.



Having a solid pulley will mean the charger is constantly pushing air to the TB, thus the need for a BOV of some sort to vent it. The setup on my sprinter is still clutched, it it switched on via the autronic under certain load settings

 

[Lextreme II]

What size is your pulley? The stock on the 2TZFZE (Supercharged Tarago) has 4" pulley.

 

[Jake Breyck]

you can always put the throttle body before the supercharger makeing the setup more compact and no need for a bov.

 

[Sprinterboy]

What size is your pulley? The stock on the 2TZFZE (Supercharged Tarago) has 4" pulley.

To be honest i've never actually measured the pulley on the charger, I'll do it tonight and post it up if you like.

 

[quadcam boat]

Castlemain Rod shop sell aftermarket pulleys to fit the SC14 and SC12

 

[Lextreme II]

I decide to turbo my supercharged Previa instead. http://toyovans.com/turboprevia.html

 

[boostedtundra]

Sc14

I have an SC14 for sale. we used it on our E-mod Miata autocross car for quite a while then switched to an M62 eaton. It has a solid pulley conversion. It should have the front bearing replaced otherwise it is fine.
$85.00 [email protected]