Wanted Crown ECU

[Jakespeeds]

Looking for a Crown ECU. If you have one to sell let me know how much.

Jake

 

[gloverman]

Might help if you say which model. UZS131 / UZS141 / UZS151 etc. All are quite different.

 

[Jakespeeds]

Oh! Been doing some reading and had not seen anything yet on the differences. I am doing a 1U with M112 supercharger in front of a R154. I know with where I want to go I will need to go standalone eventually but wanted to make it run first on the stock ECU.

Does that help to narrow it down? I have been reading the tech articles and did not see anything describing the differences.

Jake

 

[samsdad]

Table an offer and it had better be a good one...All set ready to go

 

[Jakespeeds]

If someone does not have one to sell I will just go straight to standalone.

Is that what you meant by "table an offer"?

Jake

 

[devojet]

I have a Crown ECU, I'm in Australia so not sure how much postage would be but you can have it for AU$100 plus postage.

 

[Jakespeeds]

Thanks for the offer. Unfortunately based on some of the other replies I gave up and went out and bought a Mega-squirt system. Sorry I missed yours I would have scooped that up.

Jake

 

[devojet]

No problem. You will be better off with the megasquirt anyway considering your planned mods. Im running a megasquirt on mine.

 

[Jakespeeds]

That's good to hear. From the research I did the latest MS runs the 1U with all its original parts and there is no need to convert to Ford electronics.

Jake

 

[devojet]

That is correct, mine is running all the standard parts. Just had to add an air temp sensor. Search my posts on here, I posted a link the the megasquirt forum that has all the info you need to run a 1u from megasquirt.

 

[Jakespeeds]

I was hoping you would say something like that. I will start looking at all your past posts. If you could send me a link to your MS post to [email protected] I would appreciate it. Can't have too much knowledge.

Jake