2wire speedo reluctor to 3 wire conversion?

[nite b]

Right, heres one for the techies.. Converted my chaser from 1GFE/auto to 1UZ/W58. The old auto only had one 2wire reluctor & 12tooth ring on rear of box to feed dash speedo (& therefore ABS). There is no 2nd speed sensor in box, just the 1.
The W58 has a 3 wire (hall effect?) cog driven pickup.
Does anyone know if the signal can be converted to reluctor format? What are the 3wires on the pickup, Earth/signal/12or5V possibly?
Im hoping to NOT have to fabricate the 2wire/12T ring onto my tailshaft!? But its looking that way. Just need a signal for the dash so Ive got a speedo.

Any help most appreciated! Thanks!

 

[KDog]

Do you guys have Jaycar in NZ?
If so go there and buy their speedo corrector kit.
It will convert the signal to hall and give you a divide/mulitply function on the number of pulses kit no KC5380

 

[sideshow]

i sell a unit that does this exact conversion and its adjustibe too

it is much more complex than the jaycar unit so therefore more expensive

i use it for calibrating 2 wire analog speedos

i have tried the jaycar one but didnt get good results maybe i built it wrong
or didnt set it up correctly

 

[nite b]

KDog- Great! We do, ill see what they have got & pricing.

sideshow- Interested in pricing of your unit.

Thanks

 

[sideshow]

jaycar units sell for around 50 bucks and u have to build them yrself

i have 2 units
one has either analog or digital input and only digital output these are 220 dollars
2nd unit has either analog or digital input but this has analog output which i think s one you need these are 330 dollars