1UZFE swap for a Willys M38 1952

[Hassan_21]

I'm pretty new to car build engine swaps and whatnot, I just needed some help regarding this swap I know it's a very random build but I mean why not? All I wanted to ask is that is this swap possible. I mean everything is possible but I'm not looking into a very heavy demanding build just a casual swap to get the car up and running. Also, I'm based in Pakistan and there's not much information on such builds so some feedback would be appreciated.

 

[Zuffen]

Usually the biggest hurdle is getting the engine to fit in the engine bay.

The engine is basically 700mm x 700mm x700mm.

I would think the vehicle may not have enough room for the heads (the widest part) but start measuring and let us know what you get.

 

[gloverman]

Usually the biggest hurdle is getting the engine to fit in the engine bay.

The engine is basically 700mm x 700mm x700mm.

I would think the vehicle may not have enough room for the heads (the widest part) but start measuring and let us know what you get.

I'm working on a willys with an ls2 atm which fits with room to spare but its not a normal willys.

 

[Hassan_21]

Usually the biggest hurdle is getting the engine to fit in the engine bay.

The engine is basically 700mm x 700mm x700mm.

I would think the vehicle may not have enough room for the heads (the widest part) but start measuring and let us know what you get.

change of plans I'm getting a 65' CJ7. Was quite hard to find one but it'll be here in about a month.

 

[Hassan_21]

I'm working on a willys with an ls2 atm which fits with room to spare but its not a normal willys.

do you think the CJ7 will be a good fit with the 1uz?