nitrous

This race occured about three or four months ago when my car was running at it's full potential under a full 150 shot of nitrous... I also got full exhaust mod's including headers, Torque converter upgrade, Custom Intake and a Piggy back ECU on my 1992 SC400.... I lined up at the red and rev'd...

Just a few questions about nos I didn't see posted in other threads... I have a very simple dry nitrous setup on my '92 sc400, 10lb bottle, single solenoid, single dry fogger nizzle, WOT switch, and a purge kit. Also 255HP fuel pump. 1. Because its a dry kit and im depending on the stock ecu...

Sup fellas, dont have the sheets to show because they dont have a printer nor do I have a floppy but... I dynoed my car with a 75 shot with bottle psi at 1100psi and it made 250hp and 295 tq with it starting to run pig rich at about 4500 rpm. Then I did a 150 shot run at 1100 psi bottle...

Anyone on here running a 1UZ with the baby bottle or if they know anyone who is/has in the past?? If so I'm just after some information as a baseline. Is it a DRY or WET shot? What size shot is being used? Has it been Dyno'd on the bottle? If so to what sort of power and what other mods? And...

Wayne's Tundra is up and running but not tune. Here are some updates. www.lextreme.com/tundra.html

i'm ready to install nx wet kit on my 92 ls400. my questiong is where should is the fuel line i'm suppose to tap for the fuel tee for the kit? any info would help pictures would help even more. thanks in advance

Two Stage Dry Nitrous *Pics of Direct Port Water Injection Installation Added* Pictures resized.

I am wanting to put nos on my 98 GS4 and have a few questions I understand nos but not the different setups. 1 What brand would you reccomend(alot of people tell me zex) 2 I know isnt the safest but what is a good number to be at?(from what ive read 100-130 seems to be the norm) 3 From what I...

i see alot of turbo and supercharged articles on the v8 lexus, but why not any for them on nitrous? is there a safe amount to use if its a wet kit? i have catback exhaust, magnecore 8.5 wires, iridum plugs, msd dis-4 plus, sheilded cold air intake w/k&n filter and de-screened maf, 5-30 full syn...

Well i went to a test and tune last nite and tried out the wet nos system i installed on my std crown 1uz in a courier 1 ton ute . ihad previously run it with a 60 hp shot and ran a 13.6 at 99 mph . so last nite it ran 13.1 at 105 mph with lots of wheel spin off the line its very hard to get it...

How is it going. Wondering what it would take to raise my horsepower from the supposed lexus rating of 250-to a more pleasing 300 flywheel horse rating. Problem is that My sc400 is also my daily driver outhere in California, so I need to keep my street legal. Any help please? I am planning...

Finally my ZEX wet kit arrived. Only a week late!!! Now to put her in. I'll keep you up to date... padey

I want to put some colder plugs in my Ls400. What do people use and/or recommend? padey

Hey guys, im planning on running nos soon on my car, but trying to do as much information research as possible so i do it right. I hear that its safe to run half the power you produce. For example if you have 300 crank HP then you should put no more than a 150 shot (hp). What do you think...

Hi, I have no experience with Nitrous and am wondering if it would suit my 1990 Celsior. Is anyone running Nitrous on a 1UZ and if so what sort of HP shot can a standard 1UZ and drivetrain handle?

What parts do I need to upgrade to safely spray a 100 shot. I have my exhaust and air intake completed. (Waiting on pulleys) Mostly I have heard that I need an ignition system with a retard and a larger fuel pump. Though I have heard that the stock fuel pump in the sc400 is enough. Trying...

Has anyone worked with retarding the timing on the sc430 engine? I was told by MSD to use 2 MSD DIS 4's. Any help would be appreciated.