1uzfe

okay looking for opinions and suggestions for my next project.. looking to ad FI to my 1uzfe swapped 4runner. basic low down= engine:90 ls400(all emissions stripped) all stock otherwise drivetrain: R150(factory v6 runner drivetrain) fuel supply: factory 90 v6 runner...

Hi All, Im very nearly done with my V8 conversion in my Mazda Bongo/ Ford Freda. I've got some 60" side pipes to run up each sill and it must be de-cat'd as the cats dont leave enough room for my gear selector cable. Question is, do I need an X pipe or will the Lexus V8 run ok without it. Im...

Hey there im currently building a 1uzfe 94 twin turbo engine for my jetboat, have cut a head open through the ports to see how far I can take them out, but before I attack my heads ill get a plan for the valve situation ,has anyone measured the 3uzfe valves to see if they are interchangeable...

I have a 1uzfe from a 92 sc400 in my 4runner and my mechanic friend and I are trying to get it running with a a340f transmission. The 2 shift solenoids are connected correctly to the ecu but the truck never shifts out of 1st gear. If I remove the wiring harness I can manually shift to L, 2, or D...

I have a front sump still attached to my engine and need to convert to a rear sump for my swap. It is from a 92 LS400 and will include all hardware. Can reply via forum or email [email protected]

Hello, The title says it. Looking to purchase performance parts for a 500HP 1UZ single turbo built. Rods, pistons, studs, cams, bearings, etc? Let me know what you have. Thanks!

Hi all. I have a 1uz in my runner and I can't seen to get the cooling side of thing right. I have an oversize full alloy radiator out of a supra in it running a custom made shroud with a 14" thermo fan on the inside, EL falcon fans on the outside pushing. I have removed the double bypass side of...

Hello! I'm gathering the required parts to do the blasphemy of parting a SC400 '92 and using the 1uz engine, a r154 tranny and suspension components/brakes/diff for a AE86 project. I know there some people who wouldn't like it, but I want to do it. And since it seems lextreme as a site gives...

Hello all, I'm a new member but long time troll. I just picked up a 1995 SC400 and love it, but wish it had more power. I've been in cars a long time and have several running projects, built a number of turbo cars (mostly rice burners) and have a good deal of general car knowledge. I've...

hows it goin fellas? I'm TJ. scooped up a 98 sc400 a couple of months ago. needs a little love. someone resprayed the IJM and did a shit job so now its going galaxy grey. waiting for get the suspension in and then im going to supercharge. (any and all info on that previous note is VERY...

so I have a 1uz Im converting to manual. I need to know if I can use a KA24DE transmission and clutch with a 3SGE flywheel that is modified to fit the 1uz. the reason I am asking is that I can get a 3SGE flywheel for $15 bucks at a wrecking yard without spending $300 or so on a custom...

hey, Im working on a 1uz swap and Im trying to make the engine work without any ECU or digital programming. I have run into a problem with the igniters that send power to the ignition coil assemblies(at least im pretty sure thats what they do.) the igniters are fired in time by a...

Can anyone modify a 2uz intake manifold to accept a m112 blower? Ive seen it done on 1uz's, but what about 2uz's?

G'day A long shot, but I've been looking for a pair of old crappy compact log style headers from a crown V8, anyone able to help there? If so I'm in NZ, would need shipping to Auckland NZ. Cheers in advance.

Hey guys! Im very new here and have learnt all that i know from reading up on these forums. So the deal is im swapping in a 1UZFE in my 2.4 diesel surf but im not going with a body lift, so i can anyone pleeease guide me as to what kind of issues can i face in doing so. To make matters...