Search results

tri y headers guys here is something that will help, i saved it sometime ago, info since appears to have gone from their site.It covers cylinder pairing and 180 deg headers if you want the v12 type sound. Regards Lambo

hi elliotaw, found this salted away from the last time i used it for the 1uz, seem to remember the port length as 2.2" think it was zuffen who gave me that measurement but can't find the post pretty sure its right, Regards Lambo

Hi Don't forget to bolt the ignitors to the body earth or no sparks and no start. Regards Lambo

Big, I have met a guy in NZ that claimed to have a engine running on water, the Men in Black found out about it, came all the way from the USA and told him to stop, or he would have a new pair of shoes, made of concrete. He also worked out a way of getting welding gas from water, and from what...

Found this today on another forum link all about UN1 and their weak spots etc http://www.rainbrush.com/lotus/images/UN1.pdf Regards Lambo

Hi MrPhreak, Yes it was the gold one, i was looking at, sounded like the suspension had seen better days but could have been repaired, and the rego had lapsed , could be hard to re vin and register i think,i spoke to the owner, after he pulled it from the auction, and sold it directly for cash...

Hi jibbby, I guess you are not running the factory computer, because i remember reading that the factory computer retards the spark to reduce the output and so the jarring effect on the trans, it uses the kickdown switch to detect that you want to change gear and momentarly retards the...

Hi, I believe it is the in cabin air temp sensor for the aircon. Regards Lambo

need help guys i have the chance to buy a uzz32 the emv screen is missing, does it control the active suspension in otherwords would the active system by useless without it. Can the car be raized and lowered without it, also is it posiable to just raize the front only with this system. Best...

Yes it looks like you need deep pockets once you go past 400hp, there are lots of manufactures producing boxes that will take 600hp but not much change from 15-20k, on GT40s there is a guy called wanni he is a manufacturer, search for his posts, he is somewhat controversial but he seriously...

Hi justengt8, If you want info on transaxels for gt40, have you looked at http://www.gt40s.com/ search for Audi 016 or UN1 or what ever takes your fancy, so much info up there it is hard to know where to start. Regards Lambo

Transaxels Hi you could go With an Renault un1 13 from a r21 turbo, i believe they will hold 350-400hp and many adaptors are already made here in nz, or like i am using a Audi 016 from a cd 100 good up to 350hp, with the audi its the sudden shock of a burnout that kills them but you can add a...

Hi Mrfuel, Maybe this will help its a spreadsheet i made of my ECU its from a 1991 sc400 soarer ecu no 89661/23220 its a uzz31. What number ecu do you have. Regards Lambo

Hi Big, I can't help with a ecu but did see a 6cyl windom at pickapart a couple of weeks ago it also had the hydrofan identical to the SC400 knowing toyota it could be the same ECU to control it , i will have a look maybe tomorrow let you know. Regards Lambo

Well i crawled under the e30 today and the tanks appear to join the two tanks at the top, i would guess that the join is about 7-8" long. I assume its hollow to allow fuel from one side to the other, nothing a hacksaw won't prove, the passanger side tank is smaller and would be usable i just...

Hi tempheat Thanks for the reply and the picture, i have 2 of those tanks already but they are to big to fit in the space i have, today i was told a E30 bmw has two tanks linked together with a pipe somehow, is this correct, i guess its back to Pickapart tomorrow to have a look at one...

While we are on the subject of fuel tanks, i am trying to find a couple of small tanks for my project, i am looking for something i can remove from a road car,spent the weekend at pickapart but no luck, what i need is something about 700 long, 400 wide, and 150 high with top filler or another...

Hi John, Very nice indeed, i need i need, i just wonder how much flex your wooden mount will offer lol Regards Lambo

Thanks for the reply, I have been informed by one much more knowlegable than me that, it will be a complete redraw, so i have decided to learn SW or something similar, and redraw the whole thing from scratch, i think this will be quicker than trying to resolve all the errors in the files i have...

Hi guys maybe someone can help me. I am trying to change some SW files of a space frame chassis for my project, the original files were in dfx format and were imported into SW for me, they were in inches, a friend converted them to metric and he said he unlocked the layers for me...