oh dear
well the surf is now making a very funny noise in what sounds like the tranz or torque converter ( NEVER GO TO THE RIVER WITH BEER AND MATES ) anyway i went to hard in the river crossing and for a breif second under full load it lost drive but then was fine but the next day...
that looks nasty kelvin any idea why the sleeve has failed . do you get these made or are thay machined for a surf part . i will have to put some kms on mine to see if my fix for the oil feed works ...but thats after i buy your wiring help to get mine sorted
thats cool you like my fix for the oil feed fault . it make sense to block the oil feed hole that goes out the side and re-drill the end of the shaft to pick up the oil feed so that it basically makes it the same as the surf auto box i have photos if you want them kelvin . i do wonder if...
fault code 56
well i have googled the world and read till my eyes hurt . i have a ucf 20 that i have fitted into my toyota surf and have this annoying code 56 as soon as the key is on . what i have found is that it might be the missing hydraulic oil level sensor missing and i did read one...
WELL on the second 1uzfe to surf job now and thought i would update kelvins question about the ( maybe) oil flow fault to the rear bearing ... if you use the lexus auto and cut the output shaft down to about 64mm when you refit the speed sensor onto the output shaft use a grub screw to...
here is what i did as i thought there would be a prob with the rear bearing (first thought was to replace with a sealed bearing ( but as i have been working in a hyd work shop i got to thinking about oil flow hot and cold ( my main reasons for finding a fix for this was as i had planned to...
i have been reading a lot of posts for the last 7 months ( mine is a ucf20 i have most of the wiring sorted but am trying to confirm the three body plugs aswell just by looking at the plugs you can tell what ones are power feeds and what ones are sensor feeds and outs some are oil pressure...
hi and i know some one else bugging you . but i will be buying parts off you very soon just as soon as i buy engines . i only have one question i have some concerns about buying the two engines i need for my surf and my mates and that is if i buy two 1uzfe engines with part numbers (...