V8 Engine mount measurement help

The 1UZFE EGR Delete Kit is available for sale here.

GrahamB

Yellow Belt
Hello All,
I am hoping someone can help. I need the distance between centers of engine mounts for a V8 Soarer. Hopefully someone has a crossmember or Lexus with motor out. Reason for needing this....fabricating engine mounts on a jig using std Soarer V8 mounts.

Regards,
Graham
 
Just sit the motor you have on the floor, put a square against the centre of the stud on each mount and put a chalk line on the floor. Then just measure between the chalk lines
 


Back
Top