Parts Tuned Delco ECU for 1UZ-FE

[Peewee]

Up for sale is the tuned ECU from Petes old 1UZ MA70 Supra.
Pulled 150rwkw a few years back, and held the title for Toymods most powered NA RWD for quite some time.

Loom has been rebuilt and the 'birds nest' removed (for those who remember it).

Comes with

• ECU including chip tuned by Richard from Dicks Electronics.
• 2 x VS V8 ignitors
• 1 x Dicks magical box
• 1 x 1bar MAP sensor
• 1 x Air Intake temp sensor
• 2 x Coolant temp sensor (one is brand new)
• 2 x GM Knock sensors (one is brand new)
• 2 x spare ecu's
• All wiring diagrams to suit, incl pinouts of plugs I've added.
• Modified loom to match in well with standard Toyota wiring philosophy.
• Set up to use standard TPS
• Standard ISCV is wired in, but not tested (came to me not installed, so not sure if its setup/tuned)

Probably comes with more that I've forgotten.

It was installed and running on my car for a while, but I had a few problems I couldn't solve, so I reverted back to a stock ecu.
Problems were

1. Was running rough
2. Was running lean
3. Sometimes stalled, and wouldn't restart, but left for a while and it would start first flick of key

Problems 1 and 2 continued with the stock loom/ecu, and subsequently solved, so were not a fault of the Delco.
Problem 3 however I never solved.

I'm also not sure if the fuel pressure it was tuned at. Car was fitted with an R32 GTR fuel pump, so I'd guess around 50psi.

Asking $800 incl post.

 

[sideshow]

mmmmm i remember that car
prob no 3
i guess they didnt get soemone to neaten the wiring up
all those years ago
i had a quick 5 min look over it many years ago while doig another job

 

[Peewee]

I neatened it all up, it was a mess when it got to me.