Im playing with an arduino getting the data off the TDCL of a 92 soarer.
i've found a bit of info here:
file:///E:/Users/Owner/Downloads/OBD-I%20protocol%20description.PDF
and here:
forum.arduino.cc
Can anyone with a proper scan tool tell me what data they can get please.
The info from the links checks out ok ( not too sure on some of the scaling ) but id like to find out what the missing data is.
i've attached a log of the data im getting.
i've found a bit of info here:
file:///E:/Users/Owner/Downloads/OBD-I%20protocol%20description.PDF
and here:
![forum.arduino.cc](https://europe1.discourse-cdn.com/arduino/original/3X/c/c/cc8a2213dd4988dd286af4a52d2b029faf7c97d5.jpg)
obd1 Toyota.
Hi. Just want to make obd1 data display, I found obd-1 protocol description in pdf, and obd diagnostic circuit. I need to figure out how to make simple analizer using only arduino with screen to check the signal or explanation of obd protocol. Thanx. OBD-I protocol description.PDF (99.9 KB)
![forum.arduino.cc](https://europe1.discourse-cdn.com/arduino/optimized/3X/c/c/cc4b0921af3d89006e843364a2b18989ad72f83e_2_32x32.png)
Can anyone with a proper scan tool tell me what data they can get please.
The info from the links checks out ok ( not too sure on some of the scaling ) but id like to find out what the missing data is.
i've attached a log of the data im getting.