Lextreme II
Active Member
Finally got my PCV system right. I deleted the PCV on the driver and route both vents to a Home Made Catch Can and this is the solution for FI application. Here is what u need
* 2 pieces of 5/8" to 3/8" reducer in 90 degrees
* 1 piece of 1/2" to 3/8" reducer
* One Husky water seperator (Home Depot $11.95)
* Two 1/4" NPT to 3/8" push in barr
* 4-5 feet of 3/8" tube and few zip ties...
Note: Make sure you plug up the TB out with a 5/8" cap and a 3/8" cap on the driver side. Bang! you are set.
* 2 pieces of 5/8" to 3/8" reducer in 90 degrees
* 1 piece of 1/2" to 3/8" reducer
* One Husky water seperator (Home Depot $11.95)
* Two 1/4" NPT to 3/8" push in barr
* 4-5 feet of 3/8" tube and few zip ties...
Note: Make sure you plug up the TB out with a 5/8" cap and a 3/8" cap on the driver side. Bang! you are set.
