My distributor Conversion

[V8Celica]

Here are some pictures of what I did to the distributor to get the delco/kalmaker computer to work.
http://gallery.910bluebird.com/album66

I will be pulling it apart to make a second one for my drag car so I'll measure them up, take better pics and do a write up. But engineering is a week away so these pics will have to do for now.

 

[Zuffen]

How much do you figure the whole conversion cost you.

There are alot of people interested but cost tends to drive them to EMS etc.

 

[V8Celica]

Cost me $170 for the holden distributor (to get the halleffect sensor and chopper wheel), $70 for the distributor cap and rotor button and it should have cost $330 for the commodore ignition module but I brought a few of them not long ago. And $40 for leads from supercheap.

 

[V8Celica]

It cost me nothing to get the aluminum bits made. But I'd think about $200 should do it once I get some drawings done.