Lexus V8 into EH Holden
- Thread starter 64 EH
- Start date
The 1UZFE EGR Delete Kit is available for sale here.
Dreamkiller
New Member
Im about 80% complete on my Lexus into EH conversion.
What do you need to know exactly?
What do you need to know exactly?
64 EH
New Member
well i would like to speak with you as i am the secretary of the EH Holden Car Club of NSW, firstly were are you from. I'm looking to obtain as much info as i can for this conversion, please email me direct at [email protected]
thanks in advance
thanks in advance
64 EH
New Member
Agro64 i would like to say first of all Very Nice job !!!!!
would it be possable for me to contact you or for you to contact me ?
my project is only in the planning stage right now and i am trying to obtain as much info as i can for the guy who is doing the work for me, an as your a keen reader of Street Machine mag. i would guess that you would know the name Mark Delaquar, he is the engeneer who will be doing the conversion.
would it be possable for me to contact you or for you to contact me ?
my project is only in the planning stage right now and i am trying to obtain as much info as i can for the guy who is doing the work for me, an as your a keen reader of Street Machine mag. i would guess that you would know the name Mark Delaquar, he is the engeneer who will be doing the conversion.
Dreamkiller
New Member
64EH,
Im in brisbane and am the president of the fairly newly formed ej/h car club of QLD.
Agro64,
What did Mr enforcer do about the sump for yours?
Ive had to make a custom one to fit with the rear mount rack & peanut steering.
Heres a pic of mine!
http://www.lextreme.com/forums/attachment.php?attachmentid=1478&stc=1
Im in brisbane and am the president of the fairly newly formed ej/h car club of QLD.
Agro64,
What did Mr enforcer do about the sump for yours?
Ive had to make a custom one to fit with the rear mount rack & peanut steering.
Heres a pic of mine!
http://www.lextreme.com/forums/attachment.php?attachmentid=1478&stc=1
64 EH
New Member
Hey there Dreamkiller, thats great to hear. will we be seing you at the 2007 EH all state run in western Sydney.... i hope so. I am the secretary of the NSW club who is hosting the event in 2007, this event at easter 2007 will be where i will be unvaiingl my project, that is if i can't get it unvailed before then. You can see pics of my car in its current state at www.64eh.com then go to the gallery.
Dreamkiller
New Member
Ill be at the next one for sure!
Im spewing i missed the one at Bendigo.
Would have been good to see the unveiling of Pete's Limo.
Im spewing i missed the one at Bendigo.
Would have been good to see the unveiling of Pete's Limo.
mycarhasposessedme
New Member
Dreamkiller did you notice that was your 64th post- freaky ooooooooooohhhhhhhhhh
firstly thanks for the positive comments guys.
now for some answers
firstly: the 220kw figure the printed is a guesstimate on their part as ive got some sorting and then fine tuning to do but at this stage its makin around 10rwkw at 3500rpm then it was making at 5800rpm when i first had tuned stock so there is definately an improvement.
secondly: never been down the quarter but would like to one day.
thirdly:64eh you have a pm
fourthly:mr enforcer didnt touch the sump they actually cut and braced the crossmember to fit around the sump to save worrying about possible dramas with needing to change oil pick ups and so on.
might have to try and get to the 2007 run. Used to be a member of the ehccnsw but always lived too far from the cruises and must of needed the money when my renewal was due(probably out of beer)
now for some answers
firstly: the 220kw figure the printed is a guesstimate on their part as ive got some sorting and then fine tuning to do but at this stage its makin around 10rwkw at 3500rpm then it was making at 5800rpm when i first had tuned stock so there is definately an improvement.
secondly: never been down the quarter but would like to one day.
thirdly:64eh you have a pm
fourthly:mr enforcer didnt touch the sump they actually cut and braced the crossmember to fit around the sump to save worrying about possible dramas with needing to change oil pick ups and so on.
might have to try and get to the 2007 run. Used to be a member of the ehccnsw but always lived too far from the cruises and must of needed the money when my renewal was due(probably out of beer)
just out of curiosity AGRO..
i've got the old Zoom mag your car featured in and the recent SM.
just how much of a difference has the blower made??
performance wise? fuel wise? smoothness? etc.
Mate there is definately a difference in low end torque but over all i cant give a true guide as its making a bit to much boost at the moment (12pound @ 3500rpm) and breakind down over 4000rpm so ive just got to save up again to get a different pulley and some better plugs and leads.
As far as fuel goes it still seems pretty good (little if any difference on the highway)and at the moment its running rich with limited timing to stop detonation.
Still smooth as silk just sounds really horn
i've got the old Zoom mag your car featured in and the recent SM.
just how much of a difference has the blower made??
performance wise? fuel wise? smoothness? etc.
Mate there is definately a difference in low end torque but over all i cant give a true guide as its making a bit to much boost at the moment (12pound @ 3500rpm) and breakind down over 4000rpm so ive just got to save up again to get a different pulley and some better plugs and leads.
As far as fuel goes it still seems pretty good (little if any difference on the highway)and at the moment its running rich with limited timing to stop detonation.
Still smooth as silk just sounds really horn
