Help with injector cc/min : 1uz vvti Denso 23250-50030

[ed_ma61]

am trying to find the official flow rates of:

Denso PN 23250-50030

as found in the 1uzfe vvti, and also the 3uzfe vvti

cc/min or lbs/hr i dont care. reference rail pressure would be useful

regards
ed

 

[Pro]

if they are a mauve / violet colour they are a 251cc injector at 290kpa and are 13.8 ohm resistance.

the non-VVTi engines are 220cc at 290kpa.

 

[ed_ma61]

theyre a peach colour - maybe salmon...

 

[Pro]

can you stick an ohmeter across them? are they a 2.9ohm or a 13.8ohm?

yellow/orange? or red/orange

 

[ed_ma61]

ill multimeter them and post pics this evening

cheers
ed

 

[Lextreme II]

3UZFE i think is around 270 cc/min or something similar flow rate at least in US Spec.

 

[EyesofThunder]

Are there any replacement injectors for the VVTi 1UZ-FE? Or is there a way to use std injectors on a VVTi 1UZ-FE?

It appears from this thread the 1UZ-FE and 3UZ-FE (both VVTi) use the same injector. Does the 2UZ-FE?

I can't really take my car off the road to clean the injectors (my business partner has an injector cleaning machine), so I would like to figure out a way to run a different injector or find a set I can send him to flow and clean.