My Truck has been offroad for a SAS, not run for 4-5months.
As I'm nearing completion, I thought I would fire it up yesterday (even though I haven't finished the exhausts), It primed and kicked into life after a couple of seconds..I let it idle for a further 10-15s, then blipped the throttle & it died.
I noticed I hadn't remounted the igniters to the body so they would of been lacking a good earth, with the CEL flashing I went the engine side port to check the codes and by mistake connected E1 to B+
now I have no CEL at all.
I DC'd the battery and left it overnight in the hope of a memory reset but nothing has changed.
Could I have I fried something with my momentary lapse of concentration
As I'm nearing completion, I thought I would fire it up yesterday (even though I haven't finished the exhausts), It primed and kicked into life after a couple of seconds..I let it idle for a further 10-15s, then blipped the throttle & it died.
I noticed I hadn't remounted the igniters to the body so they would of been lacking a good earth, with the CEL flashing I went the engine side port to check the codes and by mistake connected E1 to B+
now I have no CEL at all.I DC'd the battery and left it overnight in the hope of a memory reset but nothing has changed.
Could I have I fried something with my momentary lapse of concentration
