dizzy on a 1uzfe

[BLOWN EA]

hey to all has any of you done this set up put a dizzy on the 1uzfe to run off the passanger side cam shaft

i have a msd 7al-2 that i am going to put in and a pro comp 9000 dizzy in the car

 

[rivmasta]

wouldnt CDI be easier and more efficient?

 

[skid]

I did look quickly for you but couldn't find it.

However if you look on here and search under 'carb' there is a thread going from a year or 2 ago with a picture of a GM dizzy driven from the drivers side bank (UK/Aus/NZ/etc) with a holley carb.

I don't know if it's the same guy but I also read another thread about someone doing the same andthe just attached a socket on the end of the dizzy shaft so that it took drive straight from the cam wheel!

Mark

 

[sly si]

dizzy...

some dudes dizzy...

 

[fugly]

I have put a dizzy on a 1UZ in the past, i used a Chrysler V8 electronic dizzy which i cut down, i used a 3/8 drive 17mm socket to drive straight off the LH timing sprocket retaining bolt.

My discription is pretty hopeless, i am going to have to take some photos if you are interested.

 

[BLOWN EA]

hey yeh if you dont mind i would like to see some pics