crs sump - anyone know where a good pic is?
- Thread starter edz
- Start date
The 1UZFE EGR Delete Kit is available for sale here.
hey eddy. how's the build up going?
the crs sump you are talking about might be the one i posted.
here is a link to the file:
http://www.lextreme.com/forums/attachment.php?attachmentid=347
the crs sump you are talking about might be the one i posted.
here is a link to the file:
http://www.lextreme.com/forums/attachment.php?attachmentid=347
Dreamkiller
New Member
Edz,
Im also doing a 1uz conversion in an EH.
This is how my sump is looking. Im running a rear mount rack though.
Im also doing a 1uz conversion in an EH.
This is how my sump is looking. Im running a rear mount rack though.
edz
New Member
Thanks for all the quick responses guys - this site is tops!
Zuffen, I'd love to have my car ready for Sydney, but no such luck! A long way to go (aiming for later next year)! But I'll be there in my new Lextreme T shirt and hat!
Dreamkiller - I too am doing a rear mount rack, had enough of crappy tyre scrubbing steering with front mount racks in my Fj! Using a Mazda 323 rack and Hq stubs (reversed arms). Photo's look good - nice welding! Did it end up straight? I was thinking of using the sump to keep it straight? Is that Eh in the background running the new invisible ultralightweight stub axles, you better watch the bumps!
Aaron - that's the pic, thanks for that, how fast is the fastfj? Getting closer to completion? I'll email you a pick of a friend from our car club - he's fitting a 1UZ and widening the guards 105mm to suit a commondore independant rear! My build is starting again, sick of building the house so trying to spend one night a week at least! Firewall is dished, starting on rack mount and sump.
Zuffen, I'd love to have my car ready for Sydney, but no such luck! A long way to go (aiming for later next year)! But I'll be there in my new Lextreme T shirt and hat!
Dreamkiller - I too am doing a rear mount rack, had enough of crappy tyre scrubbing steering with front mount racks in my Fj! Using a Mazda 323 rack and Hq stubs (reversed arms). Photo's look good - nice welding! Did it end up straight? I was thinking of using the sump to keep it straight? Is that Eh in the background running the new invisible ultralightweight stub axles, you better watch the bumps!
Aaron - that's the pic, thanks for that, how fast is the fastfj? Getting closer to completion? I'll email you a pick of a friend from our car club - he's fitting a 1UZ and widening the guards 105mm to suit a commondore independant rear! My build is starting again, sick of building the house so trying to spend one night a week at least! Firewall is dished, starting on rack mount and sump.
quadcam boat
Member
Nice piece of fabrication. Well done.
Dreamkiller
New Member
I finished the sump a couple of weeks ago, thats the only pic i have at the moment. It ended up quite straight, within a mm or 2 and was faced.
I priced some of those stub axles but were too expensive so ill be using run of the mill items.
Has your project stalled? as you havent updated your site for a while.
I priced some of those stub axles but were too expensive so ill be using run of the mill items.
Has your project stalled? as you havent updated your site for a while.
edz
New Member
Hey Bryan, I was actually about to call, yes I'd love to borrow the tig to do my sump.
The project hasn't stalled, just keeping the wife happy with gardens, tiling etc! Back into it a bit more regulary - I'll post photo's tonight of the mazda rack mounts I'm welding brackets for at the moment. Then I can start the sump.
Been playing with a Dillon Gas torch (now known as Henrob). Great for very neat profile cutting, welding and uses half the gas. Welds aluminium etc (a lot easier than using an oxy). http://www.cut-like-plasma.com/ or in Australia - American welding in Victoria.
As for fuel - with petrol heading high, I've bouht an lpg gas system to fit! Will be interesting - twin turbo's and lpg - power and a thicker wallet!
The project hasn't stalled, just keeping the wife happy with gardens, tiling etc! Back into it a bit more regulary - I'll post photo's tonight of the mazda rack mounts I'm welding brackets for at the moment. Then I can start the sump.
Been playing with a Dillon Gas torch (now known as Henrob). Great for very neat profile cutting, welding and uses half the gas. Welds aluminium etc (a lot easier than using an oxy). http://www.cut-like-plasma.com/ or in Australia - American welding in Victoria.
As for fuel - with petrol heading high, I've bouht an lpg gas system to fit! Will be interesting - twin turbo's and lpg - power and a thicker wallet!
Dreamkiller
New Member
I have a henrob 2000 torch i used for my sump, worked really well!
edz
New Member
building a new sump
Okay guys, the rack is in (check pics - more on site), seems to give zero bump steer which is good! Have started building the sump, had to move sites as I ran out of room on tpg. http://edzoldholden.250free.com/edzeh4.htm - have also setup a direct link when it's up and running in a couple of days - www.edzholden.com.
Okay guys, the rack is in (check pics - more on site), seems to give zero bump steer which is good! Have started building the sump, had to move sites as I ran out of room on tpg. http://edzoldholden.250free.com/edzeh4.htm - have also setup a direct link when it's up and running in a couple of days - www.edzholden.com.
Dreamkiller
New Member
I used 6mm for base plate and 2mm for the rest.
Similar threads
