cam/crank angle sensor wiring.

[crazy_rich]

Hey, I'm currently wiring a celsior 1uz up with an oldschool Linkplus G1.4, i'm pretty much sussed on everything apart from which cam angle sensor to use as there are 2 shielded cables, one to the crank angle sensor and one for the cam angle sensor I'm suspecting I use the passenger side one like a microtech? If anyone can shed any light on this it'd be much appreciated, thanks. -Richard.

 

[gloverman]

Engine speed (crank) input goes to the crank angle senser beside the crank pully. Sync (cam signal) is best to use the LH (passenger) side cam angle sensor. It is possible to use either but requires different settings in the link. From Memory the White wires are the earths which will be common to all three sensors. Cheers