Belt lengths and part numbers, no aircon, no fan pulley

The 1UZFE EGR Delete Kit is available for sale here.

hungryforinfo

New Member
I have a SC400 with the hydraulic fan, I have removed this pulley, (left hand nut, and puller required)

I ran the belt straight through the middle of this and up over the idler (removing the aircon pump)

Belt sizes:
6PK 1550
6PK 1575
6PK 1590

6 is the ribs and the 4 digits are the overall length of the measurement 1550mm etc.

1550 is quite common and the 1575 is harder to get.

Also the Camry oil filter fits on and you can get it in 3 different sizes.
 
Use a rope tape measure and bring the length of the belt measurements into a auto parts store near you to match up....That is what I did after deleting my hydro-pump...
 
Belt Lengths

Maybe it was a bit of over kill but I replaced the hydraulic fan pump assembly with an idler pulley from a Crown Majesta. I used two electric fans in the place of the hydro unit.
 


Back
Top