Parts Battle Version rods, Electric fans, stand alone, Supermade lenses Tons more! all OBO

[scotturnot]

All prices do not include shipping unless noted
Battle Version rods, Electric fans, stand alone, Drif DVD's, Bomex mirrors, Supermade lenses, Walbro pump, Bride hood pins, Car PC, Touch screen, 460cc injectors and More.

Selling my Brand new SuperMade lenses, still in original box. $350 shipped, I know its new price but they are new and you dont have to wait months to get them from Japan, and I dont really need to sell them. I could install them on a set of lights and get twice that, I know, I just sold a set.
430 brake light: $45
1uz Hydralic fan delete bracket and pulley, installed never ran $100
New Trico Neoform wiper blades for SC $13.00
Pair of Junk Supra head lights, great for parts or custom work $40
Rear SC glass: $95
New Agency Power black shorty antenna for Honda S2000: $30.00
8 MAZDA RX7 1989-91 460CC fuel injectors in good condition DENSO part#195500-2010 Plug and play $150
8 New 1UZ-FE colder Iridium spark plugs $75


Battle version traction/trailing rods. Brand new, only install never driven. They sell new for $500+ selling for $375

Bride monster locking hood pins Super Rare! Only 1000 sets were made! $90

Lexus seat belt pads $10

Bomex mirrors Jade green $150






1uz underdrive pulley and belt, Custom made! $130

 

[scotturnot]

Low miles Walbro 255 pump $60

Flex-A-Lite daul fans $180


Nice Black passanger door switch $30


DVD's $5 each or all seven for $25

4.0 GT emblems $20

Adaptronics Stand alone 100% Plug and play!
its a brand new turn key Adaptronics stand alone ECU. I originally purchased this stand alone ECU and then I bought a supra jumper lead. I posted the jumper harness to Neil Griffiths in Australia. Next I paid him to wire it up as a turn key plug and play unit. Neil is running this exact stand alone on two different 1UZ cars running 15lbs boost with great success. He wired it up and ran it on his car for me to verify it was plug and play. Even had it dyno tuned at 10lbs boost and 15lbs. It comes with both Maps! It is going to practically run right out of the box.
If you plan on boosting a SC400 this is a great chance to get into a plug and play stand alone at a great price. Not to mention you wont have to wait months to get a unit made up and shipped.
This is the closest thing to a run out of the box setup you will ever find. You will need to upgrade to larger injectors (it was tuned on 390cc) and add boost. It will include both a 10lb and a 15lb map.
When I bought this the cost for the ECU/wiring labor and test/tune was About $1400, then I bought the TT jumper harness for another $390, paid about $40 shipping to Australia so in total i spent almost $1900 dollars having this thing set up. It is literally brand new.
I will let it go for $980 add another $150 and get the full Video gauge system that allows you to put a wide selection of gauges on a screen like the one for sale below. this is bad ass, no more trying to figure out where the gauges mount

 

[scotturnot]

Complete car PC. This screen is a perfect centerpiece for any car! Absolutely beautiful. It is custom made by Mop Top Pros and the craftsmanship is awesome. It has a 10.4" touch screen monitor molded in. This custom work cost Zach over $600 for just the part to be made. Add the Remote controlled monitor and climate control and that alone is more than I am asking for the whole system. The Climate control has been sent to Lextech Lighting and had LED upgrades $$$$$$$ are you seeing the Value?
Now add the PC, the keyboard with ball mouse, the Mobil mouse the GPS and cables and you have a extreme system.
I was considering installing this in my car but have decided I have too much on my plate already. My plan was for it to be my stereo, navigation, gauges, and engine management control. This monitor has not yet been synced with the PC but it does lamp up. I hooked the system up on my bench to verify that much. I don’t know a ton about these systems but this looks really complete.
Lets sell it all for $1200

 

[Lextreme II]

Scott,

Looks you are doing early spring clean... what sizw is your crank pulley....

 

[scotturnot]

I need to measure it, it was made by a member here I need to look him up, he was also doing a 6 speed swap.

 

[cribbj]

That's a steal for the Car PC. I've got around $1100 in mine so far, and the software development's not finished and the screen hasn't been molded into the Supra's console yet. Good luck with the sale, Scott.

 

[scotturnot]

All this stuff sold, please close

 

[cribbj]

Closed but not deleted. Some nice pics!