CAT Flange Drawings available for download!

[Lextreme II]

Courtesy of BIG. Here is the link to down load this drawing. Its is for 1989 to 1994 LS400 or 1992 to 1995 SC400 Catalytic Converters. (OBDI)

DWG Version

DXF Version

 

[Big]

One thing I didn't do was get the hole made the right size..just drill it out bigger to what you need..cheerz

 

[sniper]

One thing I didn't do was get the hole made the right size..just drill it out bigger to what you need..cheerz

Are you referring to the center hole or the bolt holes?

 

[Lextreme II]

One thing I didn't do was get the hole made the right size..just drill it out bigger to what you need..cheerz

Big,

The holes are little smaller so that u can thread them.

 

[White ls400]

what programs needed to read that drawing as with my computer it comes up all matrix like

 

[edz]

what programs needed to read that drawing as with my computer it comes up all matrix like

Autocadd or any of the free cad programs out there that will read dxf files. Otherwise, just do a search for dxf viewer - lot's of free ones to let you print. Here's a link to 2 - http://download.cnet.com/AutoDWG-DXF-Viewer/3000-6677_4-10690622.html http://www.edrawingsviewer.com/

Here's a jpg version

 

[AutoLuxLexES]

Hello all,

Am wanting to start working on my exhaust and looking for the 3 bolt 1uz cat flange. I have a shop that can water jet ss for me.
Thanks
Charley