I've got 95% of everything I need to complete this swap, my only issue was some of my harness plugs were broken when I got the motor. I found an ECU from a 90 at the local Upull and it's plugs. I'm going to go through the entire harness and remove anything I don't need or want. Can you guys take a look at what I came up with and let me know if there's anything else I can remove? This will be a manual transmission, no EGR, no traction control. Just looking for the bare minimums to run correctly.
I've been looking all over the net and haven't seen anyone post up what I need to keep, I'm hoping this will help others in the same boat.
IGSW
STA
VTA1
THW
OXL1
THG
KS
T1
SP2+
VC
+B
+B1
NSW
VTA2
THA
OXR1
E2
SPD
T2
SP2-
E1
MREL
W
FPR
FC
BATT
IDL1
IGF1
KNK1
VF1
IGT1
G2+
G1+
NE+
IDL2
IGF2
KNK2
VF2
IGT2
G-
NE-
STJ
ISC4
ISC3
ISC2
ISC1
#20
#10
E01
STJ1
HT2
HT1
PR
#40
#30
E02
Uncolored text are to keep, blue I'm guessing are optional, and red I can get rid of. I didn't include any of the wires for the auto tranny.
I've been looking all over the net and haven't seen anyone post up what I need to keep, I'm hoping this will help others in the same boat.
IGSW
STA
VTA1
THW
OXL1
THG
KS
T1
SP2+
VC
+B
+B1
NSW
VTA2
THA
OXR1
E2
SPD
T2
SP2-
E1
MREL
W
FPR
FC
BATT
IDL1
IGF1
KNK1
VF1
IGT1
G2+
G1+
NE+
IDL2
IGF2
KNK2
VF2
IGT2
G-
NE-
STJ
ISC4
ISC3
ISC2
ISC1
#20
#10
E01
STJ1
HT2
HT1
PR
#40
#30
E02
Uncolored text are to keep, blue I'm guessing are optional, and red I can get rid of. I didn't include any of the wires for the auto tranny.