1UZFE Wiring Issue

[AAKHAN]

Hi Fellows.

I'm new on the forums but been a silent reader of these forums for the last 1 year. I have a few issues going on with my 1uzfe swapped in R31 Skyline. As this being my first project I am mostly dependent on my mechanics to work on it.

The problem im facing with my motor is that Bank 2 on my 1uzfe (vvti) stops working when I drive it for a few yards. The issue im sure is with the wiring as the wiring from the vvti sensor on bank 2 was broken and not sure which grip on the ECU do I need to connect it to. Also I need to know where to connect the o2 sensor wires in the ECU. As we have been working without the wiring diagram because I am not really sure which exactly is the wiring diagram for the motor that I have.

My motor is a 1UZFE Vvti with immobilizer.
Can anyone help me get the exact wiring & pinouts as the ones we have been working with helped us wire the car till here & now we are kinda stuck.

I have looked up a lot of wiring diagrams but not really sure which one to follow.

Attaching picture of engine & ecu so you guys can identify it for me.

 

[Bushwhacker]

These any help?.....
https://drive.google.com/folderview...&usp=sharing&tid=0B0WE7dVhvJd_MGswNmc4Q0VxOUk

 

[AAKHAN]

@Bushwhacker

Ive went through these but since I dont know which car my motor came from & what year is it so can't exactly follow the specific wiring diagram for my motor.

Any help in identifying what year and what car this motor could be from?

 

[Bushwhacker]

@Bushwhacker

Ive went through these but since I dont know which car my motor came from & what year is it so can't exactly follow the specific wiring diagram for my motor.

Any help in identifying what year and what car this motor could be from?

A 1997 Toyota Celsior according to ToyoDIY...
http://www.toyodiy.com/parts/p_J_199707_TOYOTA_CELSIOR_UCF20-AEAGK_8404.html?hl=89661

 

[AAKHAN]

A 1997 Toyota Celsior according to ToyoDIY...
http://www.toyodiy.com/parts/p_J_199707_TOYOTA_CELSIOR_UCF20-AEAGK_8404.html?hl=89661

Thanks a lot bro that was a great help. If I am not wrong I think I need to follow the wiring diagram for a 1997+ LS400 Wiring Diagram?

 

[Bushwhacker]

Thanks a lot bro that was a great help. If I am not wrong I think I need to follow the wiring diagram for a 1997+ LS400 Wiring Diagram?

1998> LS400 diagrams so work for you.

 

[AAKHAN]

I try working on it. If I'm successful. I'll buy you a beer for sure