1998 LS400 - How to power the front seats up?

[Jesus-Ninja]

Bit of a dumb ass move - I've removed most of the loom now, but haven't removed the seats

So, where does the power to the seats run? Is it on of the the looms that runs down the sides, or the one that goes down the centre?

Any guesses as to which wire, if given 12v, will magically make them come to life?

Cheers

 

[Jesus-Ninja]

Found it

For anyone else who stumbles across this post. On each side loom (along the sill) there's a branch of loom that goes under the seat. Of the bunch of wires, there are two that are larger (and the same gauge as each other). Ground the white/black wire, put 12V to the blue/red and your seats will come to life.

 

[gloverman]

Similar to the later LS430 im stripping at the moment.