turbo

Hey I'm wanting to do a rear mount turbo setup on my Toyota soarer and just looking for recommendations on good budget turbochargers. Only aiming for 300-350rwhp as I'll be using the stock ecu with a safc-2. Also if you have any recommendations in Melbourne for getting the safc-2 tuned. Cheers

Hi, New member here and am busy reading the various threads. I suspect my questions are already answered so thanks for the patience as I locate them. If you wanted to point the way that would be great. Or if you wanted to wait a few days for me to find the answers on my own and then add any...

What boost have people reached on stock 3UZ pistons? Im building a 3UZ with early thick rods and arp head studs, rings gapped for boost and full rotating assembly fully rebalanced. Will be running a Holset He400 Turbo. Engine is on Megasquirt MS3. will be running 99ron pump fuel. Aiming to...

Hello everyone, I'm creating this thread more of for myself but I encourage anyone who has any kind thoughts and knowledgeable information to post here too (hopefully we can stay on topic). :) As you can tell by the title, all this thread is just my personal blueprint layout for my plans on my...

Hello everyone, I want experts to put some combination here for Max output as N/A and Forced. like which generation block (1UZ gens or 2UZ or 3 UZ) with which head (VVTi/Non-VVTi). I thank you all for seeing and replying.

okay looking for opinions and suggestions for my next project.. looking to ad FI to my 1uzfe swapped 4runner. basic low down= engine:90 ls400(all emissions stripped) all stock otherwise drivetrain: R150(factory v6 runner drivetrain) fuel supply: factory 90 v6 runner...

Hi, I'm starting the turbo project on my car. It's a 1990 ls400 with stock 1uz and 260,000 miles. I got a Holset HX35 from a friend and want to put it on. I am making a list and I have so far thicker head gasket and arp head studs, intake piping, etc, and I was going to go with the Apexi SAFC I...

Hey there im currently building a 1uzfe 94 twin turbo engine for my jetboat, have cut a head open through the ports to see how far I can take them out, but before I attack my heads ill get a plan for the valve situation ,has anyone measured the 3uzfe valves to see if they are interchangeable...

Best bang for the buck? I understand Motec M880 / M800 is one of the best, but the price is pretty steep. So what's a cheaper standalone that can manage the 1UZ well and offer traction? Thanks!

Hello, The title says it. Looking to purchase performance parts for a 500HP 1UZ single turbo built. Rods, pistons, studs, cams, bearings, etc? Let me know what you have. Thanks!

hi i would like to know what you think of the following set up: older model 1uzfe motor (as they seem to be able to handel more hp) twin hi mounted t3 turbos integrated inter-cooler spitronics emu and spitronics transmission system built a340 tranny (lextreme torque converter and sift...

Hi, I am planning a twin turbo build for a 92 1uz sc I have most of the parts I think I need but would like an opinion as I am new to the UZ. I am more familiar with working with 2JZ engines. The original plan was a 2JZ swap, as I started looking for something more unique the plan became a 1JZ...

So Here it is- I want to boost my car. It is a 99 GS400 with VVTi &E-shift. I have am immediate budget of about $1800 and a complete budget of about 4-5k$ I will like to have extra power as soon as possible. I am willing to try supercharging fro now due to $ and then later move to...

hello all, im new to this site but have been a member of boost cruising for a few years and no one on there could help me with my build. Im looking at putting a 1uz into a 1984 hilux dual cab. i was originally running a standard 1g-gte supra engine but spun a bearing and cant find the stuff...

hello all, im new to this site but have been a member of boost cruising for a few years and no one on there could help me with my build. Im looking at putting a 1uz into a 1984 hilux dual cab. i was originally running a standard 1g-gte supra engine but spun a bearing and cant find the stuff...