swap

  1. M

    Ucf10 fuel rail on Ucf20 engine?

    Hello all - question is the title; but here's some background for those who care - I bought a UZ from someone on marketplace who had planned on swapping it into their ae86. The UZ 'apparently' comes from a 96 ls400. Now the plan is to drop it into my 84 celica supra. The wiring was abysmal, so I...
  2. J

    Idle surge

    Hi everyone, New to Lextreme, not new to yota's. I need some help. I'm in the final stages of a 1uz swap into a 86 4runner. Ive got a true bastard. 94Ls400 engine, 93SC400 harness and ECU also its a Manual. I have the engine running but I'm experiencing a idle surge. On start it sruges from...
  3. K

    96 T100 2wd 5spd UZ swap

    Hello all, I'm a newbie to the forum and I'm toying with the idea of 1UZ swapping my 96 t100. It's currently a 2.7L 5 speed manual 2wd, so I'm not anticipating the physical swap to be very difficult, but I'd like to know if anyone who has done this swap or a similar swap can weigh in on what all...
  4. K

    99 vvti swap, e30 bmw, no power under load

    Ive gotten the wiring diagrams from Kelvin from the cartune company. and wired up as much as i could. its slightly different than his diagram, but all my (B+,BM+,OCR+, etc). is wired. only things that arent wired up to the ecu are stuff from the traction ecu, and oem shifter assembly. Ive sent...
  5. D

    3UZ-FE into Cadillac ?

    Hello everybody. Im Miro, from Slovakia (Europe). One nice day, i bought Cadillac Fleetwood Brougham d Elegance 1986 stretch limousine. I felt in love with this titanic on road. My first ride was 1000km trip from Switzerland to Slovakia.. and i noticed that engine doesnt work well. Its...
  6. R

    mx83 1uz swap starts no idle

    sooo i’ve put a 93 sc400 1uz in my 91 cressida, i got the harness done by a shop and they came by again today to make sure the wiring isn’t the issue, so, the car starts up strong revs to about 1500 and shuts off. it runs the same amount of time everytime, i’ve ran codes i only got some for o2...
  7. M

    Need help 1uz swap

    I have a 87 Cressida and I plan to put a sc400 1uz in it and I’m trying to figure out what all I’ll need to use the w58 trans that’s in it. Any ideas?
  8. George_R

    Lexus IS250 to 3UZ-FE (completed)

    Two recent projects of mine, 3UZ-FE 6a/t to IS250 Both of them feature fully functional instrument panel, a/c , push start and most importantly TRC & VSC systems. Other key things to mention are stock looks both inside and outside, clean wiring etc Old demo clip of the 1st car's VSC...
  9. K

    1uzfe vvti wiring problem (immo?)

    HELPPPPPPPPPPPPPPPPP Ok, so i made a dumb move and challenged myself to build a car in 1 week, putting a Lexus 1uz onto a w58 into a Mk3 Supra, but I hit a major roadblock... My engine won't run, it'll crank but nothing more. I've been trying to get my engine to run for the past three days...
  10. R

    93 SC400 1UZFE into 88 RX-7 Journal

    Hello all, This is my first project log on here, so please bear with me. I hope to share anything I find or uncover. This is a budget build with a budget of $4000. Mostly every part will be sourced at junkyards. If you have any advice or knowledge I would be very grateful for your insight...
  11. T

    1UZ into MB 190E

    conversion for Mercedes Benz 190E in South Korea. Originally I was planing to get 1uz vvti into my 190E, but it's changed to non-vvti because its intake mechanism looked very far from my technical expectation. Although I didn't have any problems with immobilizer, drive-by-wire and other...
  12. Y

    Anybody interested in AE86/1UZ conversion thread?

    Hello! I'm gathering the required parts to do the blasphemy of parting a SC400 '92 and using the 1uz engine, a r154 tranny and suspension components/brakes/diff for a AE86 project. I know there some people who wouldn't like it, but I want to do it. And since it seems lextreme as a site gives...
  13. P

    1uzfe into 1995 Isuzu Kb260

    Has anyone attempted a 1uzfe swap into a 1995 Isuzu Kb260? Any information would be much appreciated! I'm kind of new to this game...
  14. I

    Trade 1uz - My front sump for your mid/rear sump - Australia

    I have 97 LS400/Celsior front sump setup and need mid or rear sump setup. Located in Newcastle. [email protected] Ph 0466 439 443 Cheers, Chris.
  15. S

    i need help with swap

    i own 93 ls400 my motor is done and wondering on a swap i currently own a lexus sc300 with a 1jzgte and have a 2jzgte motor in my garage, should i drop the 2jzgte in my ls400 and if so how would i go into doing it, my main concern is the wiring like should i use a standalone or can i use the...


Back
Top