nos

ive got a bone stock ‘93 ls400 1uzfe. I’ve got exhaust and intake on it. It’s in my celica. I wanna skip the build stuff and go straight to nitrous for drags. What’s the “safe amount” I’d like to not blow the engine up as it is a real pain to remove. (Worse than when it was in the Lexus...)

Hello all, I'm new to the forums, I have been searching to see if anyone has ran preferably a wet nitrous system on their 3uz-fe engines on this forum. I take it this forum isn't as active now a days from most of the threads i see haven't been active in years. But it's worth a try to ask...

i need help with my zex nitrous set up. i do not want to cut my stock fuel line. i been trying to find a tee that will fit where the fuel line comes apart. i measured the fuel line treads as metric 1.00 and 13mm the nitrous has a -4an hose. what can i use to tee off the stock fuel line...

I come from a long line of domestic projects. On those platforms I always just bought a handheld programmer. I see that on my '98 SC400 I need a piggy back or stand alone. What's my best option to use for someone to do a solid nitrous/street tune on my car? Also, can anyone suggest a...

picked up some BKR7E's for my nitrous setup. what should i gap the plugs at for a 125-150 shot? thanks!

Clean400's Centrifugal Supercharged Nitrous 1UZ Let's start off with the mods I've done so far. Suspension Setup: NF210 / Tokico Blues Comfortable suspension, more sporty than stock. Only a slight drop. Great for people who want to keep that Lexus feel. Suspension is very smooth...

hey, im planning a build on my 1uz engine. its going in an offroad 4x4 buggy and im after some info on running NOS. ive never worked with it before and any info would be good. as for the engine im looking at building in 2 stages. top end being valves/valve springs, ported polished, cams and...

hello all, i am am curious as to if anyone have dyno numbers on a stock 1uz with just nitrous? if so how much power was made on what shot? my goal is to make descent power without having to boost it. thanks Jessie

UPDATE: February 4, 2021 A limited supply of original Lextreme parts are back in stock including the EGR Delete Kit, torque converter, 3/8" cat flange and supercharger fish bracket! My Motor has 0 miles since the rebuild so I don't care to tear into it too deep . What are some cheap/ easy ways...

Just jumping over from the Club Lexus forum and I am pretty new to the Lexus family. Not new to building cars at all though. I've been building cars and drag racing for over 20 years. I've built Chevy's, Fords, 2 Nissans, and 1 Supra. I've always loved the SC400's and spent about 6 months...

What do I need to upgrade in order to do a 100 shot of Nitrous on my supercharged Tundra 5.7 engine? Just the pistons? Rods? Head studs etc??? Currently running on stock boost... Thanks.

Fellas, how much of a HP increase will I achieve with this planned setup. Also, tell me if I'm doing anything wrong here. I have a V8 98 vvti SC400 Lexus. I've already customized my stock exhaust system with 2.25" "H" piping all over, removed all resonators, and retained stock mufflers. It...

I'm looking for the inexpensive kind, roughly $2-$4/plug that would be good for a 75-100shot zex. I can't seem to get a part#. Also, I prefer only Denso or NGK.

My sc400 needs more power. I'm not satisfied with 290hp, well maybe 300 with the newly customized exhaust. I would like to drop a 75-100 shots of wet zex nitrous but I've heard people say the 1uz vvti can't handle the additional hp due to weaker rods compared to the non-vvti motors. Is this...

First off, I am new to this forum but not new to the Lexus scene or go fast options. I currently have a 2004 Lexus LS430 and the only engine performance mods I have done are Magnaflow Exhaust and a short ram intake by Fujita F5Air. I am thorughly enjoying the overall performance, especially...

Hi All. Well i like forced induction, it makes heaps of power and is sometimes even cheeper then NA. But i love NA, i belief its an art, and it sounds so good. I am also a big fan of Nitrous Oxide, it gives great bag for the buck, and if it is switched off you motor is stil standard. My...

First, this isn't about running nitrous in my motor, it's about using nitrous nozzles and jets to spray methanol for a M/W injection system. Second, since I don't know squat about nitrous systems, I don't even know if this is feasible, but the thought occurred to me, so I thought I'd float it...

So I ran a 14.88 @93.6 with no nitrous. My best boost only pass. I then slowly upped the nitrous shot until I got to a 75 shot. [email protected]. Unfortunatly my tires are bald so I couldn't hit the nitrous until just after the 2nd gear shift, or I could have shaved off another .2 seconds...

Saw this first on CL, looks pretty mean, but the bright paint hurts my eyes. 2UZ with twin turbos. Check it out http://www.supraforums.com/forum/showthread.php?t=495173

This race occured about three or four months ago when my car was running at it's full potential under a full 150 shot of nitrous... I also got full exhaust mod's including headers, Torque converter upgrade, Custom Intake and a Piggy back ECU on my 1992 SC400.... I lined up at the red and rev'd...