engine mounts

  1. ivan129

    Polyurethane Engine Mounts

    Does anyone have experience using Polyurethane Engine mounts in place of OEM rubber mounts? I'm wanting to know whether Polyurethane mounts would transfer more engine noise and vibration through the car. Thanks
  2. 1

    1uz swap from 93 4runner to 94 Ln106 ute

    Hey all, Just bought a 4runer that has been 1uz swapped already. I'm going to transplant it into my solid axel ln106. 1) anyone have any pics of a solid axeld 1uz swap? How's the clearance?? 1.5) I've seen things about engine mounts and mounting the engines higher, how does that work and does...
  3. X

    polyurethane diff ear mounts

    I just finished the polyurathane diff ear mount bushings!! I had these made up for my sc400 as I did not want solid as I intend to drive my car on long trips and since there was nobody that offered some I spent the money to have them made and a mold poured etc so needless to say they cost me a...
  4. H

    Using Urathane for engine mounts

    I've read projects were people have designed their engine mounts using urathane bushes as well as others using rubber. Whilst rubber is the traditional method, does the urathane give any particular benefits, and what about vibrations and noise thru the mounts? I'm sure everyone will have an...
  5. B

    How to change engine mounts

    Here is how I changed my LS400 1UZ-FE motor mounts. Motor mounts changed - ClubLexus - Lexus Forum Discussion Hope it helps...
  6. sniper

    Motor/Transmission Mounts

    Making a set of custom mounts is one of the first steps many of us have to take when beginning our 1UZ swaps. I have created this thread for members to share and show off their custom mount designs to help give others who are just starting their swap, a few ideas on how they can go about...
  7. My1uz75

    Engine Mount Brackets

    Hey Blokes, I was wondering if someone could post a picture of some 2UZ engine mount brackets. By that I mean the bit that bolts to the block. I am curious if they would bolt onto a 1UZ block and be suitable for my project. The mount brackets that have come off my motor...
  8. Lextreme II

    Custom Engine Mount

    Anyone know a source where they can make engine mount? I am trying to fit a 2uzfe into a SC400/Soarer and the engine mounting holes are different. The 2uzfe block holes are about 1/16" of wider and about 1/2" higher. If you know a source, please let me know. I plan to get 3 set of mounts.
  9. P

    Engine mount

    when i start mt car i hear a thug noise from the engine, i read on one of the thread that it might be the engine mount, how do you know it your mounts are bad? where is a good place to buy the engine mount? can you instll them on your own?what are the other symptoms that your engine mount are...


Back
Top