Search results

XR8tt, We are going to wire up the car and we will also tune it. I've got to get a couple more things from Haltech today.Bosst solinoid,injectors plugs and can conector. Scott from Haltech is great to deal with and is very helpful.I'll make sure i get the upgraded software. Cheers Ben

The radiator sits right behind the intercooler only about an inch away. I've just finished fitting the twin 50mm Turbosmart blow off valves.I used -4 speed flow fittings for the vacum lines also.Not required but looks cool. The plenums will not be exposed as they fit under the factory...

Quick update on the project. We have decided to go with a Haltech E11 and most likely their digital dash with data logging.The reason for this is the no need to buy an extra 8 chanel expander box.The cost of the Motec was starting to just sky rocket with the motec with advance functions and the...

ITBs can also be a dog on the street if they are not correctly sized. What is the question being asked? are they good for power?response?selling cars?

Bigger turbo! just look at the current fastest street tyre GTR in OZ . he was running 9.1s with a HKS T51 (over 30 psi)now with his change to a GT47(under 25psi)hes run a 8.69 the second fastest time in the world.

all big power GTR's run a single TB. If you are after power just use a single is you are after on and off response on a race track itbs are the go.

Hey guys, Thanks David for posting up those photos. After those photos were taken, i then continued to work on the cleaning up the rocker covers and then removed the engines wiring harness. The harness part was not easy at all. I think all of the fab work should be finished by Tuesday or...

It allows you to adjust the base spring rate.

Hey guys, Still have not had a chance to take any decent photos yet.I can send some off my phone , they are 3 mega pixels. Today i continued with the fuel system.The fuel reg arrived and so did the SX fuel filter. I also installed the -6 return. The other area i was working on was the new...

You can fit a GT55 in there!

We have removed all of the factory cooling system, ie the air con condenser, factory radiator, massive radiator fan set-up and all of the original air suspension. I'll either try to post up pics once i get to work or ill send them over to you lex.

The center hole is for a bolt which goes in it to adjust the spring pressure. you don't have to use it if its not there just plug it up with a short bolt, make sure you get the right thread.

Hey guys, I spent most of the day working on the fuel system. I've run the twin -6 braid lines from the surge tank through the floor of the boot, at which point the merge into a single -8 fuel line.This line continues over the diff and then there is an sx fuel filter before it runs the length...

Hi guys, its been a while but the the soarer is back at our workshop to be completed. I've just been working on the fuel system today with the supply side now finished. There are 2x bosch 044 fuel pumps which come out -6 then merge into -8 for the length of the car then they again split back...

Hi guys just making up a new fuel system for the soarer that we are working on. There are three holes on the bottom of the fuel tank.Two are right next to each other and the other is about 1 foot away from them. I need to know which one is the fuel supply, return and breather. Cheers Ben

These are the guys we are using for the two tbs on our turbo 4L.Two of their 77mm units check them out. www.hypertune.net

I'm not sure if its the same rating but you can now buy 100 octane in Australia from the pump, worst case 98.

Hey guys just giving you an update on the cars progress. we went with a 720x300x76mm intercooler. 2x bosch 044 fuel pumps and we are now going to use a Haltech E11 for the tuning. From all of the results from other turbo 4 L v8's. I'm sure 400kw at the wheels shouldn't be too many problems...