Search results

The Auto unit supplied by sideshow works a treat. Piss simple too. Straight forward plug in to gear box, wire to power and neg....Too easy, excellent! Thank you Jim!

I have way too much time on my hands Jim, you should know that! The specialized Toyota tools have been made available to me through a mate at Lexus so I don't have to pull the cams, and I've a good micrometer as well. I imagine it shouldn't take that long to do.....Getting the shims I need to...

Haven't touched the sump, so must be. Cheers. How can you tell what rods it has?...Pull off the sump and take a look?

I just read this on planet soarer on about cam bucket shims;- "Several times I have read that the battery side of the engine, at the back, is a common place for the tapping noise to be heard. If this is the case it suggests a common oil flow problem to that area." This is were the noise is...

Best I can do Hilux mounts on the block....

Interference or non interference cam/timing belt.... How can I work out what series/year 1uz I have? Can you tell by engine numbers? Where is engine number located on block? I purchased the long motor, bear engine, non VVTI front sump, cut loom, no ecu, off the floor from importer not from a...

One thing I wanted to ask, is a 1uzfe a free spinning engine? as to say, if it chucks a cam belt, doesn't it free spin or does it destroy itself?

Got her back form the exhaust shop yesterday. Fun driving to the exhaust shop on the extractors. Now that I can hear the engine, not just an evil rumble, there's a rocker noise coming from NO. 7. Like a tappet noise.... Hopefully thats all it is...... I'll pull the cover off and take a...

Yeah man, that's me. Thanks for trying to help. I got it sorted in the end, sideshow help me out! Bigg upps for Jim!

The only thing I have not connected is the tach output Blue/Grey. The diagram shows -ve side of the coil plug But when I connected it to -ve side of coil plug, the coil started to trigger on and off? Is it suppose to do this? I disconnected it because of this.

Yeah, it was the cam sensor wired wrong way around. It fired up first key turn after I switched em around. Thanks big time for all your help Sideshow! Your a champ!

Also, can someone please tell me, on the fuel rail which side is "in" (fuel from the pump) and which side is "out" (fuel returned to the tank)? Just want to check, make sure I got it right is all.

No spark? I have 12V ign wired to black/red +ve post of both stock coils. I have the 12v pink wired to one of the coils black/red +ve side also. (Senses 12v up to the coil) I have yellow and yellow black wired to the -ve side of each coil respectively, and have swapped to orange and orange...

Found one.

I found one on toymods, good price too. Thanks for all your help people.

Is there a know belt size for no A/C or P/S?

Brisbane, QLD, and already have.

I called up Toyota today they said the starter part number I had taken of the starter 28100-50030 superseded to 28100-50020. 28100-50020 is of the 1GGZE super charged motor. Can anyone on here confirm that these are in fact the same stater?

Anyone out there have one? I called Autobarn, Repco and Supercheap auto today. No listings! Nothing on ebay, trade me or tradingpost either.

If any one has a 1uz stater motor in Aus that they want to sell, Preferably in Brisbane area. Doesn't have to be in working condition.